Page 1 of 3 123 LastLast
Results 1 to 15 of 42
  1. #1
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default E30 parts (and some e28) -- rebooted 3/24

    all prices are picked-up in Minneapolis


    early-model (84-87) euro valance -- $350
    - price includes new (that's right) OEM fog lights, with new (yes) fixtures (early model euros have integrated fogs), and all pigtails
    - you could run this on a diving-board car, giving you 4 OEM foglights, if you want rally car



    ++ Loads of other stuff, much of it NIB OEM. Fan clutch, switches for everything, hood strut thingies, lug bolts, exhaust hangars, ... PM for bits and pieces requests

    E30 4dr window weather strips, NIB - $80
    - at one point yours were made of pliable rubber, and kept water out, like these
    - cost new was $110 + shipping (they are a special order part)

    E30 325i pressure plate, and clutch disc -- $50

    E30 325ix steering rack -- $120
    - came from 1989 automatic w/130k
    - no leaks! includes reservoir and plumbing

    E30 325ix passenger-side control arm -- $100
    - (price new is $240)
    - used; PN 31121701060
    - boots are intact, bushing is good

    E30 325ix driver-side control arm -- $60
    - (price new is $240)
    - used; PN 31121701059
    - bad ball joint. ball joint is serviceable

    E30 325ix driver-side tie rod-- $100
    - brand new, in box, PN 32211701039

    E30 325ix engine harness -- $50
    - it is from an automatic transmission AWD car

    E30 325ix washer fluid tank -- $30
    - with NIB washer pump
    - you'll need/want one for engine swaps, whether M30, M50, M52, S50, S52, et cetera



    E28 Kick panel, tan -- $30

    E28 M30 valve cover -- $40
    - powdercoated grit black

    E28 Getrag 265 transmission mount -- $20




    e23 / e28 Large trunk toolkit -- SOLD
    - includes all you see in pic
    E30 325i brake rotors, four new -- SOLD
    - clutch plate is 3/8" wide; about 8k miles on this; still lots of life left
    E30 full headgasket-waterpump job kit, NIB - SOLD
    - Reinz HG set (manifold gaskets, head gasket, WP gasket, etc etc etc)
    - Graf water pump (for 325i, up to 1987 M.Y.)
    - head bolts set, thermostat, radiator hoses, radiator mounts, reservoir cap, timing tensioner spring, etc etc etc
    - anybody planning an M20 rebuilt/refresh should buy this... it's about $250 worth of parts, just needs fresh belts
    E30 trunk gasket seal, NIB - SOLD
    - at one point yours was made of pliable rubber, and kept water out, like this one
    84-87 euro bumpers -- SOLD SOLD SOLD
    - chrome, includes all hardware that held them onto the car they came from
    - grey market (european) style bumpers, front and rear
    - no shipping on these
    E30 325i ECU / motronic DME -- SOLD
    E30 325e ECU / motronic DME -- SOLD
    E30 325i alternator -- SOLD
    E30 M20b25 cap/rotor/wires -- SOLD
    Last edited by JPB; 03-15-2014 at 05:00 PM. Reason: euro bumpers sold, parts added

  2. #2
    Join Date
    Apr 2012
    Location
    St. Paul, MN
    Posts
    80
    Car
    1985 Euro 323i E30

    Default

    A lot of great stuff!!!

    Especially the Euro bumpers for that low price. If you still have them, can someone buy these..... dangit!


    Meng



  3. #3
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default




    Last edited by JPB; 04-04-2013 at 01:30 PM.

  4. #4
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    prices / availabilty updated
    I will be adding more parts all the time.

  5. #5
    Join Date
    Aug 2005
    Location
    Plymouth
    Posts
    922
    Car
    1989 BMW 325is TCD s2

    Default

    Your euro bumpers make me want to buy a diving board car. GLWS!

  6. #6
    Join Date
    May 2007
    Location
    Champlin
    Posts
    702
    Car
    Anaslex

    Default

    figured this would be a good place to post this rather than the random CL one http://minneapolis.craigslist.org/ws...184338588.html

  7. #7
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    I have rear side coupe windows ( but with frames, hinges and gaskets). $20 for the pair.


    And please don't post other peoples' parts in this thread. I started this thread to pawn MY e30 gear.

  8. #8
    Join Date
    Apr 2010
    Location
    55441
    Posts
    1,689
    Car
    00' 323i touring

    Default

    interested in the harness 100%

    would be curious pics on the plug wires/cap/rotor -- seem to come in handy a lot

    also, who rebuilt the calipers? just pistons and seals, or full bore rebuild?

    pm or text plz -- dont get on here that often.
    00' BMW 323iT -- 01' Toyota MR-S -- 08' 244cc scoot-puff
    84' BMW 325e/5 24V
    -- 92' BMW 850i/6 -- 97' BMW M3/2/5


  9. #9
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    PM's have been returned -- I am moving for the next week or so, and a lot of these parts are going into boxes so pics aren't going to be immediate, but i WILL get pics for you.

    Everything is in south Minneapolis... Longfellow neighborhood.

    Quote Originally Posted by 2.5-12 View Post
    interested in the harness 100%
    ....
    PM sent

  10. #10

    Default

    can that rear seat fit a 2 door, sorry i am a noob to this bmw stuff

  11. #11
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    Quote Originally Posted by cxjon View Post
    can that rear seat fit a 2 door, sorry i am a noob to this bmw stuff
    no... front seats are interchangable, rears are specific to 4dr / 2dr

  12. #12
    Join Date
    May 2010
    Location
    Eagan
    Posts
    104
    Car
    89 325ix 2dr and 4dr

    Default

    Seat backs are interchangable, seat bottoms are different but they will still go in.





    Are the calipers remanufactured or did you take em apart and use the rebuild kit with new boots, slides, bleeders, etc? Got pics?

  13. #13
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    Quote Originally Posted by 2.5-12 View Post
    interested in the harness 100%
    would be curious pics on the plug wires/cap/rotor -- seem to come in handy a lot
    also, who rebuilt the calipers? just pistons and seals, or full bore rebuild?
    Quote Originally Posted by B3M2W5 View Post
    Are the calipers remanufactured or did you take em apart and use the rebuild kit with new boots, slides, bleeders, etc? Got pics?
    They're in a box somewhere in my garage... everything is in boxes still. I will try to find them this weekend and put pics up.
    As for the rebuild, I will ask the guy who i bought them from.

  14. #14
    Join Date
    Oct 2012
    Location
    Oregon
    Posts
    1
    Car
    E30 and E34

    Default

    I would be interested int he E30 mudflaps for the metal bumper car but I would need the shipped to Oregon. Zip 97301. Thanks.

  15. #15
    Join Date
    Mar 2009
    Location
    Saint Paul
    Posts
    3,509
    Car
    B5A4tqma

    Default

    PM's replied to, parts/prices updated.

Similar Threads

  1. FS: tdi body parts..garage clean out..tons of parts!! engine parts included!!!
    By lvnthehighlife in forum VW-Audi Parts Classifieds
    Replies: 0
    Last Post: 06-05-2012, 12:34 PM
  2. Replies: 3
    Last Post: 05-10-2012, 11:36 PM
  3. Replies: 33
    Last Post: 09-13-2011, 09:55 AM
  4. FS: BMW garage sale -- e30 and e28 parts
    By JPB in forum VW-Audi Parts Classifieds
    Replies: 14
    Last Post: 07-10-2011, 08:26 PM
  5. FS: Garage Sale VR6 Parts mixed in with a few random goodies
    By trumbled in forum VW-Audi Parts Classifieds
    Replies: 7
    Last Post: 09-30-2010, 09:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •