PDA

View Full Version : WTB: 85-89 CIS Knock system



gtiguy1994
02-01-2009, 06:44 PM
Greetings. I am looking for a knock system to complete the ABA bottom swap in my Rabbit.'
I just need the harness, sensor and the dizzy. Thanks in advance!
Josh
P4C
http://i254.photobucket.com/albums/hh109/gtiguy1994/RabbitRoss.jpg
old vac system (stock)
http://i254.photobucket.com/albums/hh109/gtiguy1994/DSCN6437.jpg

hamradio
02-01-2009, 06:45 PM
Does the wiring out of a 1988 16v scirocco have knock sense?


I have an entire 16v rocco harness around. No dizzy, however.

gtiguy1994
02-01-2009, 06:47 PM
That could work hammy. Do you have the knock box?
Can we continue via PM?

chadsci
02-01-2009, 07:43 PM
I have a knock box and I will check for a harness.

Knock box $20. harness if I have one $20. I know I do not have a dizzy.

I will check monday at the shop.

Gertrude86
02-01-2009, 07:51 PM
your car is purdy

gtiguy1994
02-01-2009, 08:15 PM
I have a knock box and I will check for a harness.

Knock box $20. harness if I have one $20. I know I do not have a dizzy.


I will check monday at the shop.
Sounds good. Please let me know. :thumbup:


your car is purdy
Thanks. Please dont mind the rear fender flares missing. Running 20MM spacers were causing me to rub. I need to sell the 15's

gtiguy1994
02-16-2009, 06:07 PM
Anyone?

sitruc
02-16-2009, 08:38 PM
I got some '87 16V knockbox crap I separated from the fuel computer in an attempt to see if I could successfully separate this stuff... In testing this setup on the floor with a motorcycle battery and some LEDs and junk I couldn't get it to do what I was expecting it to, so I'm not sure if it's working or if I didn't know what I was doing. (Studying electrical engineering and then working in software gives one a strong need to tinker like this sometimes.)

You can have my ignition box and wiring for free if you want spare junk to test it with. I need my dizzy, and obviously it wouldn't work in your 8V.