40 Weight sounds nice.. Introducing morzechowski's BT A4

[JerseyShore!]

Well its been a while, but my a4 is at Full Blown just about ready to hit the dyno for E85 tuning. Figured I would share some photos, info, and news in this thread from here on. I will update with Dyno results, videos of launch control shinnanigan's, photos, and anything hip.

Teaser Video:



Info:
1998 Audi A4 1.8tqm
rare terracotta cloth full interior in beautiful condition

Electronics:
Haltech Platinum Sport 1000 standalone EMS
Haltech modified Racepak IQ3
2.0 FSI Coils ICM Delete
AEM wideband

Block:
Bored 82.5mm
JE Forged 82.5mm Pistons 9.25:1
Scat Rods
ARP Main Studs
034 Coated Main Bearings
034 Coated Rod Bearings


Head:
Stock AEB Head
ARP Head Studs

Boost:
Garrett GT3076r /.63
Garrett 600hp Intercooler
TIAL Wastegate
TIAL Q BOV

Exhaust:
SPA Manifold
034 3" downpipe with WG dump
3" SS pipe all the way back made by me
3" Vibrant resonator
3" in/ dual 3" out Vibrant Muffler

Fuel:
E85 tuned by Full Blown Motorsports
Bosch 044 Drop In Pump
Bosch 1000cc EV-14 Injectors
Fuel Lab AFPR
034 Fuel Rail
-6 AN Fuel Lines

Photo dump:



The car came with a PES T28, that lasted me less than one week, then it ate **** and died. build begin??











Some Pards.





The workstation.









Stock crank, polished and balanced.










okay so at first I quickly just threw everything into the car and ran lines so we could quickly get my friends lugtronic ecu in and start the car to make sure everything is okay before moving to cosmetics. This is what I ended up with.











Intake



Okay so now at this point we installed my buddies lugtronic ecu and the car ran great, so for some reason I thought I was try to save some money and go with Eurodyne for software. Horrible mistake.. What a POS that was, I gave the car to a local Eurodyne dealer and had them install Maestro, then they could not get the car to run properly on it. The fuel trims would peak from way too rich, to way too lean. my A/F was like a roller coaster going up and down. They kept the car for a month trying to fix it and nothing worked. So I told them to keep the tune, I got a refund, then I started doing my homework on standalone EMS's.

Also at this time, since I knew my car ran fine on lugtronic, I started making everything pretty.

Shave & Tuck.







Here I relocated my battery and washer tank to the trunk, Most people who shave the bay on our A4's move the ABS to the stock battery location, I decided against this due to something else needing to go in that location. So after some modifications to the stock ABS mounting bracket, and only two new brake lines I got it tucked away nicely.









Why i needed to keep my ABS away from the battery location.

GRIZzLY CATCH CAN YO





Fuel.





PAINT!







fuel lines.



Now the awesomeness, and how the car sits as we speak













andddd a video of it at idle on Lugtronic http://www.youtube.com/watch?v=DT6Sc...layer_embedded

At this time I went to Full Blown and got hooked up with this..







And thats it so far! The car is at Full Blown getting some final things wired in and then we will be hitting the dyno!

See you at the show

[natehack5]

Very nice. Excited for the vids of the shenanigans.

[Stumanbmx]

That intake picture gets me every time.

I'll be sure to check back on this thread when you hit the dyno! Looks good!

Maybe it's just the picture, but can your hood close with the catch can there?

[Topher]

Cool.

[JerseyShore!]

That intake picture gets me every time.

I'll be sure to check back on this thread when you hit the dyno! Looks good!

Maybe it's just the picture, but can your hood close with the catch can there?

Thanks! Yes it clears everything just fine.

[Majend]

Can't wait to see this at the show

[JTapper]

Let me know when you're hitting the Dyno. I'm just up the road.

[Stumanbmx]

Let me know when you're hitting the Dyno. I'm just up the road.

How did I not know about this place? I just looked it up and realized I used to drive by it all the time... I'm stopping by when I go home for spring break.

[JerseyShore!]

How did I not know about this place? I just looked it up and realized I used to drive by it all the time... I'm stopping by when I go home for spring break.

No clue, they flippn rock. Make sure you check out their 900whp s2000. The thing is just tits.

[derp]

Mike, I am absolutely kicking myself for not stealing my RS4 grille from the junkyard when i had the chance. I would have donated it for this project....

Excited to see this thing finished.

[VeeW]

Very clean, Is this car going to be at the eurowerks show?

[SLK]

I love the Race Pak dash.

[JTapper]

How did I not know about this place? I just looked it up and realized I used to drive by it all the time... I'm stopping by when I go home for spring break.

Because it's traditionally a Japanese shop.

[JerseyShore!]

Very clean, Is this car going to be at the eurowerks show?

yes, I'll be there. I am also going to maybe attempt to Euro Hangar.

Tapper is right, they are specialists in Japanese cars, But they do have a BAT rabbit that they take to the track. They are also building a Skyline GTR, and an insane nsx right now.

[Rowland]