Lots-o-Random VW parts, mk4, b5... cleaning garage

[veedubmechanic]

So I have a collection of parts I need to clean out. Too many piles of stuff in garage and I need room for summer tires when I mount my snows. I can ship if your not local, just pay for shipping charges (usually under $8.00) Most parts are test parts or off my own car.

MK4:

2.0L cam sprocket with good cam sensor wheel (I believe aeg? not 100% on that)
$40

"F" revision n75 valve 1.8t, works great no issues OEM
$40

Aftermarket "E" revision n75 stock 1.8t, dont know if it works, was a warranty part never installed when I got the new one
$20

Large hole Map sensor for 1.8t, works great
$20

Stock g/j/b sidemount intercooler, works great
$40

SAI pump, all hoses airbox to pump, pump to combi valve, works great no leaks no ck eng light.
$100

SAI combi valve, works great, 1.8t
$40

SAI solenoid valve, bracket, hoses, n249 solenoid valve
$60

Forge 007/008 green spring (came with my rebuild kit)
$pack of beer or club donation



B5 passat/audi 2.8/2.7


Throttle body for 2.8, came off core engine
$40

Throttle body off passat/a4 1.8t
$40

Full Auto trans service kit: 7L of VW Pentosyn atf 1, filter, filter gasket, extra bolts (NO PAN GASKET, $12 at oreilly), also comes with hand pump and also my ghetto gravity filler with about 2L of extra fluid in it.
$100

Brand new Outer Axle joint, new oem, just the joint no boot no grease
$20

Secondary air pumps
$40 each

early B5 sunroof motor
$50

crank and PS pullies V6 and 2.7t
$20 each

v6/2.7t cam pullies
$20 each

[veedubmechanic]

[veedubmechanic]

window regulator kit, new

hid stuff

[redline380]

id byy the wheel bearing but i dont want to drive down to the cities just for that. pm me if youre ever coming to st. cloud

[JTapper]

I can attest the the cleanliness of the 2.7T head

[veedubmechanic]

id byy the wheel bearing but i dont want to drive down to the cities just for that. pm me if youre ever coming to st. cloud

Don't think ill be by st cloud for a while...
I could ship...

[veedubmechanic]

I can attest the the cleanliness of the 2.7T head

Ps I have a full cam seal job kit....

[veedubmechanic]

Bump, cupholder sold

[veedubmechanic]

mk4 throttle body and monster mats sold.

[veedubmechanic]

Cam seal kit, bearing, and head sold.

[veedubmechanic]

Bumpage

[veedubmechanic]

Bilstein sports sold.
Hid module sold.

[veedubmechanic]

bump..
Sold some 115f coils I had lying around.,

Also have a new ALH tdi n75 valve!

[20VT]

what's the different between 'E' and 'F' revisions for the n75? kinda interested.

[veedubmechanic]

what's the different between 'E' and 'F' revisions for the n75? kinda interested.

F revision is the original one from 2002-2005

My new oem "e" revision spikes to 13psi and holds 10.5-11psi longer then the f revision does.

Its almost like a 225 valve imo, but not an ecs race that spikes 14 hard and tapers off


Head sold

vcg and cct kit sold

wheel bearing sold