Forum: BMW DIY

There really isn't any reason to re type all of this out since it's in PDF. This is a complete walk through to swapping out a Midland Manual (02-04)...

So today I was bored and really decided to detail my car well. So I took a bottle of this One of these

E30 318i M42/Getrag 240 clutch replacement. this basic procedure covers most BMW E30/E36 and other models as well, but a few parts will be...

E30/E36/Z3 control arm bushing replacement (Lollipops) Tools you’ll need: 1.) Floor Jacks 2.) Jack stand (recommended for safety) 3.) ½” drive...

M20 valve adjustment. Tools needed: ** 10mm short or deep socket ** 3+” ⅜” ratchet extension ** ⅜ ratchet ** feeler gauge ( .010” ) the angled...

Found here, http://www.unofficialbmw.com/e36/electrical/e36_adding_rear_fogs.html Thought I'd post it since US E36's have the rear fog blank on...

Well took a trip up to the boat in the M3 last weekend. Just out of town my car started accelerating on the freeway after I let off the throttle....

this DIY is for all E30s but for years 1983-1987 this DIY is for the tank transfer pump only, not the HPFP. for years 1988-1993 this write-up is for...

timing belt write-up E30 for M20 engines in E21, 28, 30 and 34 chassis BMW cars. things you will need: **10mm deep socket (10mm shallow if 89+...

The BMW section needs more DIYs:beer: For the record, I'm not the most mechanical person so I was given a tutorial on how to do this by my friend...

This is a how-to on how to apply Xpel Headlight Protection on a set of headlights. You can find a dealer here:...